Ondastil Mono Ventilato
Description
Description
Roofing panel with a peculiar wavy profile consisting of a profiled metal weather liner and an insulation layer of EPS additivated with graphite. The EPS insulation is shaped to form a ventilation chamber between the profiles that promotes an effective roof ventilation.
ONDASTIL MONO VENTILATO is most suitable for cost-effective commercial and industrial roofing applications.
Layout
1. Undulated metal weather liner
2. Expanded polystyrene (EPS) additivated with graphite
Minimum gradient
15% nominal gradient subject to local building regulations
Sections and details
Technical features
| Parameters | Dimensions | Tolerances |
| Width | 1060 mm - cover width 1000 mm | ± 5 mm |
| Length | from 500 to 7000 mm | L ≤ 3000 mm ± 5 mm L > 3000 mm ± 10 mm |
| Overall Height | 90-110-150 mm | ± 2 mm |
| Profile height | 29 mm | ± 2 mm |
| Deviation of perpendicularity | - | 0,60% |
| Average cross section area of the ventilation channels | 165 cm²/m per linear meter of cross section | - |
Performance
| Test | Value | Norms |
| Resistance to external fire | Bʀᴏᴏғ(t3) * | UNI EN 13501-5 |
* Test performed on Tegostil Pannello
EPS insulation properties according to UNI EN 13126
| Reaction to Fire | class E |
| Resistance to water vapour | μ = 30-70 |
| Compressive strength at 10% crush rate CS (10) | ≥ 100 Kpa |
Other properties
| Material | Nominal thickness of the weather liner metal sheet (mm) |
Thickness of EPS insulation with graphite euroclass E SE/hT (mm) |
Thermal conductivity λD = 0.030 W/mK (U = W/m²K) |
Weight of the panel Ondastil Mono Ventilato (kg/m²) |
Uniformly distributed imposed load kg/m2, including own weight * (kg/m²) |
||
| Span (m) |
|||||||
| 0,35 | 0,70 | 1,05 | |||||
| Aluminum | 0,7 | 50/90 | 0,60 | 4,63 | 380 | 150 | - |
| Aluminum | 0,7 | 70/110 | 0,43 | 5,03 | 385 | 155 | - |
| Aluminum | 0,7 | 110/150 | 0,27 | 5,83 | 395 | 165 | - |
| Coated steel Aluzinc Stainless steel |
0,5 | 50/90 | 0,60 | 7,16 | 700 | 245 | 155 |
| Coated steel Aluzinc Stainless steel |
0,5 | 70/110 | 0,43 | 7,56 | 705 | 250 | 160 |
| Coated steel Aluzinc Stainless steel |
0,5 | 110/150 | 0,27 | 8,36 | 715 | 260 | 165 |
| Coated steel Aluzinc Stainless steel |
0,6 | 50/90 | 0,60 | 8,08 | 720 | 265 | 175 |
| Coated steel Aluzinc Stainless steel |
0,6 | 70/110 | 0,43 | 8,48 | 725 | 270 | 180 |
| Coated steel Aluzinc Stainless steel |
0,6 | 110/150 | 0,27 | 9,28 | 735 | 280 | 185 |
| Copper | 0,6 | 50/90 | 0,60 | 8,78 | 535 | 200 | 115 |
| Copper | 0,6 | 70/110 | 0,43 | 9,18 | 540 | 205 | 120 |
| Copper | 0,6 | 110/150 | 0,27 | 9,98 | 550 | 215 | 125 |
N.B. Listed values are indicative and as tested in our laboratory. Static calculations are the responsibility of the Designer / Main Contractor. Alternative insulation thickness available.
* Calculated with a deflection value ≤ 1/200 L
