Description
Description
AUTOTAK is a range of self-adhering waterproofing membranes made of distilled bitumen modified with SBS (Styrene-Butadiene-Styrene) polymers, with an adhesive coating on the lower face.
Application is very simple and safe: once aligned the roll in place over a clean and primed substrate, by simply removing the silicone films from the underside and from the selvedge strips, AUTOTAK will adhere in place without the need of a propane gas torch or a hot air machine. Head joints require the use of an approved mastic sealant (COPERGLUE JOINT bituminous adhesive is recommended).
Layout:
1Upper face finish
Plain versions: TEX micro-porous black fabric of non-woven polypropylene, with 10 cm silicone release side overlap
Mineral versions: self-protecting grey or coloured slate flakes, with 10 cm silicone release side overlap
Mineral versions: self-protecting grey or coloured slate flakes, with 10 cm silicone release side overlap
2Compound
SBS-modified compound
3Reinforcement
Composite polyester reinforced and stabilized with longitudinal glass yarns
4Compound
SELF-ADHESIVE compound
5Lower face finish
Silicone release film, split along the centerline for easy positioning, alignment and bonding of the rolls during application works
Features and versions
AUTOTAK products can contribute to achieving LEED® credits.
Contains recycled raw materials
Completely recyclable
Non-hazardous waste material
Used-oil free
Chlorine free
Oxidized-bitumen free
Intended use
Flat Roofs
Pitched Roofs
Under heavy protection
Under slates or tiles
| Destinations of use according to mark standards | |||||||||
| Roof waterproofing EN 13707 | Foundations or ground waterproofing EN 13969 | Under slates or tiles EN 13859-1 | Vapour control EN 13970 | ||||||
| Exposed | Ballasted | Anti-root roof garden | |||||||
| Single-layer | Multi-layer | Single-layer | Multi-layer | ||||||
| Top-layer | Underlay or intermediate layer | ||||||||
| AUTOTAK 2,0 mm | |||||||||
| AUTOTAK 3,0 mm | |||||||||
| AUTOTAK 4,0 mm | |||||||||
| AUTOTAK MINERAL 3,5 kg/m² | |||||||||
| AUTOTAK MINERAL 4,0 kg/m² | |||||||||
Finishes
UPPER FACE / PLAIN VERSIONS
Black Tex
Standard
Fine sand
On request
PE Film
On request
Talc
On request
Ready-to-Paint sand
On request
UPPER FACE / MINERAL VERSIONS
Slate flakes
Standard
Grey H18
Standard
Grey H150
On request
Black
On request
White
On request
Ultrawhite
On request
Green
On request
Red
On request
Bourgogne
On request
Brown
On request
Micro Mineral
On request
Red
On request
Black
On request
Mineral granules
On request
Black
On request
Metal Black
On request
White
On request
Ultrawhite Polar
On request
LOWER FACE
Self-adhesive
Standard