A specific gripping primer for smooth and slightly or non-absorbent surfaces.
It is characterised by its high adhesiveness. Once dried, it creates a rough and wrinkled surface with high adhesion on the surfaces to be treated.
It is water-based, therefore not flammable; in addition, it does not release harmful vapours or unpleasant odours.
| Basis | Water |
| Appearance | Dense liquid |
| Colour | Grey |
| Approximate consumption in relation to support | - non-absorbent surfaces: 100 - 250 g/m² - plain bituminous membranes: 100 - 200 g/m² |
| Application | Manual |
| Complete drying time for subsequent coating, paints, etc.. | about 60 minutes |
| Application temperature | +5°C ÷ +35°C |
| Stability in original closed tins | 24 months |
| Packaging | 5kg, 20kg pails |
DESTINATIONS OF USE
COPER GRIP is a special primer functioning as fixative and/or adhesion enhancer for smooth surfaces such as plain bituminous membranes, metal, wood, glass, plasterboard, gypsum, cement screeds, plasters and paints.
It is also suitable for laying tiles over existing floors with cement adhesives for tiles classified as C2 according to EN 12004.
WARNINGS AND RECOMMENDATIONS
Carefully read the technical data sheet and the safety data sheet, available below.
- The product fears frost. Stir well before use.
- Store the product in its original packaging, at a temperature of not less than +5°C, protected from heat sources and away from open flames, in dry and well-ventilated places.