Elastomeric liquid waterproofing membrane, coloured, fibre-reinforced, walkable, and decorative, based on modified acrylic copolymers in aqueous dispersion.
COPERBIT COLOR FIBER reduces carbonation phenomena on concrete surfaces.Once dry, it will form a strong and elastic film with excellent adhesion to the substrate and highly resistant to weathering agents and resilient to any fissures that may form in the substrate.
The product is formulated with special fibres that increase its resistance to continuous foot traffic and mechanical stress in general.
COPERBIT COLOR FIBER is odourless and non-flammable because it is free from solvents.Available in grey and red.
CE marking according to EN 1504-2 as a protective surface coating C PI-MC-IR
CE marking according to EN 14891 as a liquid waterproofing to be used under tiles glued with DM O1 adhesives.
| Basis | Water |
| Appearance | Thixotropic fluid paste |
| Colour | Grey, Red |
| Approximate consumption in relation to support | - As a waterproofing agent: ≥ 2.0kg/m² in 2 coats (consumption with POLY-RINFORZO will be increased aprox. 0.5 Kg/m²) - As a protective finishing: approx. 0.5kg/m² total in 2 coats on plain membranes - approx. 0.9 kg/m² total in 2 coats on mineral membranes - As an anti-carbonation protective finish for concrete: approx. 0.500 – 0.750 kg/m² total in two coats |
| Application | Manual |
| Drying time out of powder | about 4 hours |
| Application temperature | +5°C ÷ +35°C |
| Stability in original closed tins | 24 months |
| Packaging | 5kg, 20kg pails |
DESTINATIONS OF USE
COPERBIT COLOR FIBER is suitable for waterproofing and covering concrete-structured roofs and concrete terraces.
It waterproofs and decorates old bituminous membranes without having to remove them.
Also used as a waterproofing for under tiles, COPERBIT COLOR FIBER is applied before gluing stoneware or klinker tiles where it is not possible to lay polymer-bitumen membranes, subsequently using a class C2 cementitious glue, in accordance with EN 12004.
WARNINGS AND RECOMMENDATIONS
Carefully read the technical data sheet and the safety data sheet, available below.
- It fears frost. Stir well before use.
- Before painting new membranes, wait at least 6 months from their laying, except for membranes with a daring top finish or TEX that can be immediately painted. Do not apply directly to membranes with PE film and gloss film finish but remove the finish by flashing.
- Do not store packages below +5°C and protected from heat sources, in dry places.
- It is mandatory to follow all the laws relating to remediation through the encapsulation treatment of asbestos cement slabs.