Metalbit Tessuto 29
Presentación
Presentación
Multi-layer profiled sheets with Coperall Profile 29 that combine metal sheeting and a bituminous membrane lined with a thick isotropic and rot-proof polyester mat.
Metalbit Tessuto 29 sheets are designed for use in roofing applications where effective condensation control is required in combination with a high noise-abatement and anti-drum performance.
Estratigrafía
1. Profile 29 metal sheet
2. Polymer bitumen membrane specifically designed to provide an effective noise- abatement and anti-drum function.
3. Nonwoven condensation control layer
Inclinación mínima
7% nominal gradient subject to local building regulations
Secciones y detalles
Características técnicas
| Parámetros | Dimensiones | Tolerancias dimensionales |
| Total width | 1010 mm | ± 5 mm |
| Cover width | 896 mm | ± 5 mm |
| Length | from 200 to 14000 mm | L ≤ 3000 mm ± 5 mm L > 3000 mm ± 10 mm |
| Profile height | 29 mm | ± 2 mm |
| Span | 112 mm | ± 5 mm |
| Deviation of perpendicularity | - | 0,60% |
Prestaciones
| Test | Valor | Norma de referencia |
| Noise abatement value | Rw = 26 dB | UNI EN ISO 10140-2 UNI EN ISO 717-1 |
| Sound generated by rainfall | Lɪᴀ = 57 dB (A) | UNI EN ISO 10140-1 UNI EN ISO 10140-5 |
| Water vapor absorption | 344 g/m² * (290 g/m²) ** |
- NF P 15-203-1 |
| Resistance to external fire | Bʀᴏᴏғ(t3) *** | UNI EN 13501-5 |
* Value calculated per m2 of profiled sheeting
** Test value measured on flat sheeting
*** Tests performed on Metalbit Tessuto 40
Otras características
| Material | Características geométricas de la sección | Carga útil uniforme Kg/m² (comprendido peso proprio)* | |||||||||
| Espesor (mm) | Peso (kg/m²) | Jxx (cm⁴/m) | Wxx (cm³/m) | Intereje (m) | |||||||
| 1,00 | 1,20 | 1,40 | 1,60 | 1,80 | 2,00 | 2,20 | |||||
| Aluminum | 0,6 | 3,84 | 8,67 | 5,35 | 388 | 225 | 142 | 95 | 67 | 49 | 36 |
| Aluminum | 0,7 | 4,18 | 10,52 | 6,63 | 472 | 273 | 172 | 115 | 81 | 59 | 44 |
| Aluminum | 0,8 | 4,53 | 12,32 | 7,85 | 552 | 319 | 201 | 135 | 95 | 69 | 52 |
| Aluminum | 1,0 | 5,21 | 16,23 | 10,65 | 721 | 421 | 265 | 177 | 125 | 91 | 68 |
| Intereje (m) | |||||||||||
| 1,00 | 1,25 | 1,50 | 1,75 | 2,00 | 2,25 | 2,50 | |||||
| Coated steel Aluzinc Stainless steel |
0,5 | 6,73 | 7,80 | 5,02 | 1048 | 537 | 311 | 196 | 131 | 92 | 67 |
| Coated steel Aluzinc Stainless steel |
0,6 | 7,72 | 9,74 | 6,41 | 1309 | 670 | 388 | 244 | 164 | 115 | 84 |
| Coated steel Aluzinc Stainless steel |
0,7 | 8,71 | 11,69 | 7,84 | 1573 | 805 | 466 | 293 | 197 | 138 | 101 |
| Coated steel Aluzinc Stainless steel |
0,8 | 9,69 | 13,41 | 9,00 | 1804 | 924 | 534 | 337 | 225 | 158 | 115 |
| Coated steel Aluzinc Stainless steel |
1,0 | 11,52 | 15,38 | 11,19 | 2052 | 1049 | 608 | 388 | 252 | 179 | 133 |
| Copper | 0,6 | 8,51 | 10,04 | 6,74 | 799 | 409 | 237 | 149 | 100 | 70 | 51 |
| Copper | 0,8 | 10,75 | 13,41 | 9,00 | 1068 | 547 | 316 | 199 | 133 | 94 | 68 |
N.B. Listed values are indicative and as tested in our laboratory. Static calculations are the responsibility of the Designer / Main Contractor.
* Calculated with a deflection value ≤ 1/200 L
