Roofing panel with a peculiar wavy profile consisting of a profiled metal weather liner, an insulation layer of EPS additivated with graphite and an internal liner of glass resin resistant to organic acidic substances and to saline mists that are typical of the farming industry.
The EPS insulation is shaped to form a ventilation chamber between the profiles that promotes an effective roof ventilation.
ONDASTIL FARM MACROVENTILATO is most suitable for cost-effective commercial and industrial roofing applications.
15% nominal gradient subject to local building regulations
| Parámetros | Dimensiones | Tolerancias dimensionales |
| Width | 1060 mm - cover width 1000 mm | ± 5 mm |
| Length | from 500 to 7000 mm | L ≤ 3000 mm ± 5 mm L > 3000 mm ± 10 mm |
| Overall Height | 155-175-195 mm | ± 2 mm |
| Profile height | 29 mm | ± 2 mm |
| Deviation of perpendicularity | - | 0,60% |
| Average cross section area of the ventilation channels | 350 cm²/m per linear meter of cross section | - |
| Test | Valor | Norma de referencia |
| Resistance to external fire | Bʀᴏᴏғ(t3) * | UNI EN 13501-5 |
* Test performed on Tegostil Pannello
| Reaction to Fire | class E |
| Resistance to water vapour | μ = 30-70 |
| Compressive strength at 10% crush rate CS (10) | ≥ 100 Kpa |
| Material | Espesor nominal extradós (mm) |
label_SpessoreIsolanteEPSGrafite (mm) |
Transmitancia térmica λD = 0.030 W/mK (U = W/m²K) |
Peso panel Ondastil Farm Macroventilato with Glass resin internal liner (kg/m²) |
Carga útil uniforme comprendido peso propio * (kg/m²) |
||
| Intereje (m) |
|||||||
| 0,35 | 0,70 | 1,05 | |||||
| Aluminum | 0,7 | 90/155 | 0,32 | 6,54 | 380 | 150 | - |
| Aluminum | 0,7 | 110/175 | 0,27 | 6,94 | 385 | 155 | - |
| Aluminum | 0,7 | 130/195 | 0,23 | 7,34 | 390 | 160 | - |
| Acciaio preverniciato Aluzinc Stainless steel |
0,5 | 90/155 | 0,32 | 9,07 | 700 | 245 | 155 |
| Coated steel Aluzinc Stainless steel |
0,5 | 110/175 | 0,27 | 9,47 | 705 | 250 | 160 |
| Coated steel Aluzinc Stainless steel |
0,5 | 130/195 | 0,23 | 9,87 | 710 | 255 | 165 |
| Coated steel Aluzinc Stainless steel |
0,6 | 90/155 | 0,32 | 9,99 | 720 | 265 | 175 |
| Coated steel Aluzinc Stainless steel |
0,6 | 110/175 | 0,27 | 10,39 | 725 | 270 | 180 |
| Coated steel Aluzinc Stainless steel |
0,6 | 130/195 | 0,23 | 10,79 | 730 | 275 | 185 |
| Copper | 0,6 | 90/155 | 0,32 | 10,69 | 535 | 200 | 115 |
| Copper | 0,6 | 110/175 | 0,27 | 11,09 | 540 | 205 | 120 |
| Copper | 0,6 | 130/195 | 0,23 | 11,49 | 545 | 210 | 125 |
N.B. Listed values are indicative and as tested in our laboratory. Static calculations are the responsibility of the Designer / Main Contractor.
* Calculated with a deflection value ≤ 1/200 L
