Roofing panel with a peculiar wavy profile consisting of a multi-layer profiled metal weather liner combined with a bituminous membrane and an exposed polyester mat for high noise-abatement and anti-drum performance and effective condensation control function; an insulation layer of EPS additivated with graphite and an internal liner of glass resin resistant to organic acidic substances and to saline mists that are typical of the farming industry.
The EPS insulation layer is moulded to form an increased air chamber with a cross section of 350cm2/lin.m. that will ensure a highly effective venting function, possibly the most effective among insulated roofing panels.
ONDASTIL SOUND FARM MACROVENTILATO is most suitable for cost-effective commercial and industrial roofing applications.
15% nominal gradient subject to local building regulations
| Parámetros | Dimensiones | Tolerancias dimensionales |
| Width | 1060 mm - cover width 1000 mm | ± 5 mm |
| Length | from 500 to 7000 mm | L ≤ 3000 mm ± 5 mm L > 3000 mm ± 10 mm |
| Overall Height | 155-175-195 mm | ± 2 mm |
| Profile height | 29 mm | ± 2 mm |
| Deviation of perpendicularity | - | 0,60% |
| Average cross section area of the ventilation channels | 350 cm²/m per linear meter of cross section | - |
| Test | Valor | Norma de referencia |
| Noise abatement value | Rw = 25 dB * | UNI EN ISO 10140-2 UNI EN ISO 717-1 |
| Sound generated by rainfall | Lɪᴀ = 55 dB (A) * | UNI EN ISO 10140-1 UNI EN ISO 10140-5 |
* Tests performed on Tegostil LG Sound
| Reaction to Fire | class E |
| Resistance to water vapour | μ = 30-70 |
| Compressive strength at 10% crush rate CS (10) | ≥ 100 Kpa |
| Material | Espesor nominal extradós (mm) |
label_SpessoreIsolanteEPSGrafite (mm) |
Transmitancia térmica λD = 0.030 W/mK (U = W/m²K) |
Peso panel Ondastil Sound Farm Macroventilato with Glass resin internal liner (kg/m²) |
Carga útil uniforme comprendido peso propio * (kg/m²) |
||
| Intereje (m) |
|||||||
| 0,35 | 0,70 | 1,05 | |||||
| Aluminum | 0,7 | 90/155 | 0,32 | 8,34 | 380 | 150 | - |
| Aluminum | 0,7 | 110/175 | 0,27 | 8,74 | 385 | 155 | - |
| Aluminum | 0,7 | 130/195 | 0,23 | 9,14 | 390 | 160 | - |
| Coated steel Aluzinc Stainless steel |
0,5 | 90/155 | 0,32 | 10,87 | 700 | 245 | 155 |
| Coated steel Aluzinc Stainless steel |
0,5 | 110/175 | 0,27 | 11,27 | 705 | 250 | 160 |
| Coated steel Aluzinc Stainless steel |
0,5 | 130/195 | 0,23 | 11,67 | 710 | 255 | 165 |
| Coated steel Aluzinc Stainless steel |
0,6 | 90/155 | 0,32 | 11,79 | 720 | 265 | 175 |
| Coated steel Aluzinc Stainless steel |
0,6 | 110/175 | 0,27 | 12,19 | 725 | 270 | 180 |
| Coated steel Aluzinc Stainless steel |
0,6 | 130/195 | 0,23 | 12,59 | 730 | 275 | 185 |
| Copper | 0,6 | 90/155 | 0,32 | 12,49 | 535 | 200 | 115 |
| Copper | 0,6 | 110/175 | 0,27 | 12,89 | 540 | 205 | 120 |
| Copper | 0,6 | 130/195 | 0,23 | 13,29 | 545 | 210 | 125 |
N.B. Listed values are indicative and as tested in our laboratory. Static calculations are the responsibility of the Designer / Main Contractor.
* Calculated with a deflection value ≤ 1/200 L
