Roofing panel with a peculiar wavy profile consisting of a profiled metal weather liner, an EPS insulation layer and an internal liner of lightly fluted metal sheet.
The EPS insulation is shaped to form a ventilation chamber between the profiles that promotes an effective roof ventilation.
ONDASTIL VENTILATO is most suitable for civil and agricultural destinations of use, as well as for cost-effective commercial and industrial roofing applications.
15% nominal gradient subject to local building regulations
| Parámetros | Dimensiones | Tolerancias dimensionales |
| Width | 1060 mm - cover width 1000 mm | ± 5 mm |
| Length | from 500 to 7000 mm | L ≤ 3000 mm ± 5 mm L > 3000 mm ± 10 mm |
| Overall Height | 90-110-150 mm | ± 2 mm |
| Profile height | 29 mm | ± 2 mm |
| Deviation of perpendicularity | - | 0,60% |
| Average cross section area of the ventilation channels | 165 cm²/m per linear meter of cross section | - |
| Test | Valor | Norma de referencia |
| Resistance to external fire | Bʀᴏᴏғ(t3) * | UNI EN 13501-5 |
* Test performed on Tegostil Pannello
| Reaction to Fire | class E |
| Resistance to water vapour | μ = 30-70 |
| Compressive strength at 10% crush rate CS (10) | ≥ 100 Kpa |
| Material | Espesor nominal extradós (mm) |
label_SpessoreIsolanteEPSGrafite (mm) |
Transmitancia térmica λD = 0.030 W/mK (U = W/m²K) |
Peso panel Ondastil Ventilato with 0,4mm internal metal liner (kg/m²) |
Carga útil uniforme comprendido peso propio * (kg/m²) |
||
| Intereje (m) |
|||||||
| 0,70 | 1,05 | 1,40 | |||||
| Aluminum | 0,7 | 50/90 | 0,60 | 7,68 | 215 | 200 | 130 |
| Aluminum | 0,7 | 70/110 | 0,43 | 8,08 | 218 | 203 | 133 |
| Aluminum | 0,7 | 110/150 | 0,27 | 8,88 | 228 | 213 | 141 |
| Coated steel Aluzinc Stainless steel |
0,5 | 50/90 | 0,60 | 10,21 | 300 | 270 | 215 |
| Coated steel Aluzinc Stainless steel |
0,5 | 70/110 | 0,43 | 10,61 | 305 | 275 | 220 |
| Coated steel Aluzinc Stainless steel |
0,5 | 110/150 | 0,27 | 11,41 | 315 | 285 | 230 |
| Coated steel Aluzinc Stainless steel |
0,6 | 50/90 | 0,60 | 11,13 | 320 | 290 | 230 |
| Coated steel Aluzinc Stainless steel |
0,6 | 70/110 | 0,43 | 11,53 | 325 | 295 | 235 |
| Coated steel Aluzinc Stainless steel |
0,6 | 110/150 | 0,27 | 12,33 | 335 | 305 | 245 |
| Copper | 0,6 | 50/90 | 0,60 | 11,83 | 240 | 210 | 135 |
| Copper | 0,6 | 70/110 | 0,43 | 12,23 | 244 | 214 | 139 |
| Copper | 0,6 | 110/150 | 0,27 | 13,03 | 254 | 225 | 150 |
N.B. Listed values are indicative and as tested in our laboratory. Static calculations are the responsibility of the Designer / Main Contractor. Alternative insulation thickness available.
* Calculated with a deflection value ≤ 1/200 L
