Roofing panel designed to reproduced the shape of clay tiles consisting of a profiled metal weather liner; an insulation layer of EPS additivated with graphite and an internal liner of glass resin resistant to organic acidic substances and to saline mists that are typical of the farming industry.
The EPS insulation is shaped to form a ventilation chamber between the profiles that promotes an effective roof ventilation.
TEGOSTIL FARM MACROVENTILATO is most suitable for cost-effective commercial and industrial roofing applications.
15% nominal gradient subject to local building regulations
| Paramètres | Dimensions | Tolérances dimensionnelles |
| Width | 1060 mm - cover width 1000 mm | ± 5 mm |
| Length * | from 1150 to 7100 mm | L ≤ 3000 mm ± 5 mm L > 3000 mm ± 10 mm |
| Overall Height | 155-175-195 mm | ± 2 mm |
| Profile height | 29 mm | ± 2 mm |
| Profile pace | 350 mm | ± 5 mm |
| Profile depth | 13 mm | ± 2 mm |
| Deviation of perpendicularity | - | 0,60% |
| Average cross section area of the ventilation channels | 350 cm²/m per linear meter of cross section | - |
* for other lengths that are not multiples of the tile pattern, please contact our Technical Dept.
| Test | Valeur | Norme de référence |
| Resistance to external fire | Bʀᴏᴏғ(t3) * | UNI EN 13501-5 |
* Test performed on Tegostil Pannello
| Reaction to Fire | class E |
| Resistance to water vapour | μ = 30-70 |
| Compressive strength at 10% crush rate CS (10) | ≥ 100 Kpa |
| Matériau | Epaisseur extrados nominale (mm) |
label_SpessoreIsolanteEPSGrafite (mm) |
Transmittance thermique λD = 0.030 W/mK (U = W/m²K) |
Poids du panneau Tegostil Farm Macroventilato with Glass resin internal liner (kg/m²) |
Capacités de charge à charge uniforme, y compris le poids propre * (kg/m²) |
||
| Entraxe (m) |
|||||||
| 0,35 | 0,70 | 1,05 | |||||
| Aluminum | 0,7 | 90/155 | 0,32 | 6,54 | 380 | 150 | - |
| Aluminum | 0,7 | 110/175 | 0,27 | 6,94 | 385 | 155 | - |
| Aluminum | 0,7 | 130/195 | 0,23 | 7,34 | 390 | 160 | - |
| Coated steel Aluzinc Stainless steel |
0,5 | 90/155 | 0,32 | 9,07 | 700 | 245 | 155 |
| Coated steel Aluzinc Stainless steel |
0,5 | 110/175 | 0,27 | 9,47 | 705 | 250 | 160 |
| Coated steel Aluzinc Stainless steel |
0,5 | 130/195 | 0,23 | 9,87 | 710 | 255 | 165 |
| Coated steel Aluzinc Stainless steel |
0,6 | 90/155 | 0,32 | 9,99 | 720 | 265 | 175 |
| Coated steel Aluzinc Stainless steel |
0,6 | 110/175 | 0,27 | 10,39 | 725 | 270 | 180 |
| Coated steel Aluzinc Stainless steel |
0,6 | 130/195 | 0,23 | 10,79 | 730 | 275 | 185 |
| Copper | 0,6 | 90/155 | 0,32 | 10,69 | 535 | 200 | 115 |
| Copper | 0,6 | 110/175 | 0,27 | 11,09 | 540 | 205 | 120 |
| Copper | 0,6 | 130/195 | 0,23 | 11,49 | 545 | 210 | 125 |
N.B. Listed values are indicative and as tested in our laboratory. Static calculations are the responsibility of the Designer / Main Contractor.
* Calculated with a deflection value ≤ 1/200 L
